More and more homeowners in the world are installing automatic gates in their homes to get top-notch protection. Gone are the days when people used to install manual gates in their homes. This is because the increased cases of burglaries, crimes, trespassing have alerted the homeowners.
Therefore, they are implementing effective security measures in their homes to keep away criminals. Gate opener is an essential component of the automatic gate system, and if you are thinking of installing it, we have come up with a helpful guide.
However, we recommend taking the help of a professional gate opener installation and repair service for quick and effective outcomes.
A comprehensive Step By Step Guide to Install Automatic Gate Opener
1. Install the Gate Properly
First of all, you need to install your gate correctly. Suppose if you have two gates. In that case, make sure both of them are aligned correctly. You can take the help of a spirit level gauge to check the proper alignment. Moreover, make sure that the gate is appropriately centered and is not too high or too low from the ground.
2. Unbox the Automatic Gate Opener
Now, it’s time to unbox the gate opener that you have recently purchased. Make sure you check the gate opener includes all the essential components such as clamps, bolts, screws, a controller box, a remote, and a gate opener arm. If you have bought the solar-powered gate opener, then a small solar panel and a batter box must be included in the box.
3. Connect and Test the Controller Box
Before you think of installing the gate opener, it’s important to know how it actually works. Instead of installing it directly, you can connect the arm with the controller box. Then, you can connect the controller box to the power source. It’s better to check the arm to see how the gate operator functions.
4. Install the Gate Opener Arm
Now, it’s time to install the gate opener arm. The arm can be used in two ways, i.e., “push to close” or “pull to close.” You can choose either way during the installation of the gate opener. Now, one or two clamps need to be fixed on the gate posts.
Make sure the clamps are situated in the center of the gate post. After ensuring this, you can now install the gate opener arm. Now the gate opener needs to be carefully installed. Plus, make sure that clamps and mouth are perfectly attached to the gate.
However, if you feel confused and challenged to perform this step, don’t hesitate to reach out to a professional automatic gate opener installation and repair service in your area.
5. Install and Power Up the Controller Box
Now, you need to install the controller box. Controller box can be installed on the gate posts with the help of screws. After this, connect it to the gate opener arm. If you have bought a solar-powered gate opener, you’ll need to install a solar panel and battery box on the gate post.
Now, connect them to the control panel if your automatic gate openers work on direct electricity or AC. You need to connect the power source to the controller box to ensure the electricity to the entire system.
6. Set up the Controller Box
Now you can change the settings in the controller box. You need to open the controller box and set the opening and closing limit. The controller box also contains more functions. You can check them out and make the changes accordingly.
7. Run the Automatic Gate Opener
Finally, your automatic gate is ready to operate! You can open and close the gate whenever you enter or exit the home with the help of remote control or smartphone application.
Get Professional Help for Seamless Installation
You can install the automatic gate opener on your own only if you follow the proper instructions. However, it can be more time-consuming and tiring. Plus, any small mistake in the installation can lead to more unnecessary expenses.
Therefore, it’s recommended that you must choose a professional electric gate opener installation and repair service. They can help choose the best automatic gate system for your property and install it quickly and efficiently at affordable prices.